Stone Drill Bit–4 Kinds of the Most Useful Stone Drill Bit

Stone Cutting

Stone cutting is an ancient practice that dates back to the early man. Over the years, cutting stone has always been difficult mainly because operators have to use chisels and hammers. With the advent of technology, stone cutting has been easier to process with the creation of stone drill bit. Numerous types of stone cutting drill bits may prove too much for you to go through. In this article, however, you will see the most common and effective stone cutting drill bit.

Stone Cutting
Figure 1: Stone Cutting

1.Carbide-Tipped Drill Bit

The use of carbide (either tungsten or titanium) on cutting tools to improve performance and effectiveness is popular among manufacturers. The superior material properties of carbide make them a suitable addition to a drill bit for cutting stone. The strength and toughness of the carbide-tipped drill bit make it the perfect tool. Another advantage the carbide-tipped blade has over other types is its service life, which is remarkably longer than other stone cutting drill bits.

The carbide-tipped drill bit structural composition comprises two components: steel for the body and the carbide for the blade tip. The strength of the carbide tip can cut almost five times as much as its other counterpart, like the HSS drill bit.

The carbide tipped drill bit is reusable if you happen to have a case of bluntness. All you need to do is to re-sharpen just as you would sharpen your typical drill bit. The same goes for the carbide-tipped drill bit, with the only difference remaining that you might need a coarse grinding stone because of the carbide toughness.

The only downside to using a carbide-tipped drill bit is the cost, as it costs remarkably more than any other stone cutting drill bit. Nevertheless, for longer service life with more effective cut, choosing the carbide-tipped drill bit will prove not only effective but also economically better.

Carbide-Tipped Drill Bit
Figure: Carbide-Tipped Drill Bit

2.Diamond Core Drill Bits

As builders, sculptors, and other professionals find more use cases for stone, they also find a more creative way of cutting stone. A critical method of cutting stone is the diamond drilling method. The way the diamond drilling method works is that manufacturers infuse diamonds with drill bits on the end of the diamond drill bit tip.

These tips have different configurations that make them cut stone differently. There are fundamentally two different tip variations for cutting stone, namely:

•  Solid-tip diamond core drill bits

•  Hollow tip core drill bits.

Solid tip diamond core bit has a unique structural design that contains diamonds on its tip and edges. This structural design gives the core drill bit a different cutting mode, which is mostly boring a hole by crushing stone the side of its cutting tip and edge.

On the other hand, they cut stone by making a hollow path in the stone for hollow-core drill bits. The reason for this is because of the configuration of the hollow bit cutting tip. They have diamonds along the edge of the tip and marginally up the sides of the hollow tip. The diamond hollow core bits cut stone at the edge of the tip as opposed to the full breadth of the tip.

These different variations, however, have various applications. Hollow diamond core bits are secondary cutting tools as they open spots that have the solid tip bit cuts. Solid tip, on the other hand, will cut out a complete hole in the stone. And sometimes they can also cut larger stones.

Diamond Drill Bit
Figure: Diamond Drill Bit

3.Masonry Drill bit

Masonry Drills Bits belong to the twist drill family, with just the structural composition of the masonry drill bit the difference in the masonry drill bit. The masonry drill bit comprises a softer steel variation and a carbide tip that manufacturers braze into the steel as the cutting edge.

Most users use the masonry drill bit along with the electric hammer drill, which serves as the power source for the cutting tool for cutting into tone. The electric hammer is what breaks down the stone. After breaking the stone, the flute of the drill bit then cuts through the stone until it gets to a new point where you may need to break again.

Standard masonry drill bits are available in a diameter range of 5mm-40 mm. You can find special masonry drill bits that come in at about 1000 mm, solely for use with smaller handheld power tools. They are most popular among users operating in domestic residences for wiring or plumbing.

If you plan on doing a great deal of work around the home, at that point, you might need to buy a complete set of a masonry drill bit. The complete sets give you the greater hole size flexibility and the attachments you can use for drilling.

In the end, your choice of masonry bit depends solely on the amount of material you are looking to cut. Operators carrying out domestic applications often tend only to buy a few instead of the complete set. Only industrial or large-scale operators move to buy an entire set of a masonry drill bit.

Masonry drill bit
Figure: Masonry drill bit

4.Concrete Drill Bit

For any individual that cuts stone or materials with similar hardness, concrete drill bits are one of the most important tools. A good concrete drill bit will make your experience in stone cutting considerably easier. So, the concrete drill bit is a must-have for any operator looking to cut stone.

Concrete drill bits have a very similar design with HSS, wood, and even metal drill bits. They have a steel shaft and spiral edges (flutes) which carry out the cutting operation. Hitherto, the concrete drill tip also has a slope, which is essential because it allows easy flow of concrete bit from the cutting point.

Some variations of concrete drill bits also contain embedded diamonds to help them cut faster and more durable. Since diamonds are generally hard, they can drill into concrete without necessarily becoming blunt. Likewise, this implies an increase in cutting precision because of the diamonds as opposed to a worn-out, chipped surface.

Other variations like the hammer drill is also an option you can combine with your concrete drill bits to make smoother hole cuts. The hammering activity will help cause the bit to drive further into the stone or concrete. After this, the flute of the concrete drill bit continues the cutting process. The hammer drill is an accessory that can prove useful.

There are also speciality concrete drill bits. An example of such is the rebar bit, which is
suitable for cutting the outer segment of stone or concrete. There is also a speciality concrete
drill bit for making smooth cuts.

The operator’s choice of a concrete drill bit is very crucial. In a cutting industry with a lot of inferior tools, the operator will need an effective tool to perform well. They will also consider the necessary accessories that will make for more effective cutting of the stone. Another important factor the operator considers is the economic effectiveness of their choices. Though there is a lower cost concrete drill that can cut the concrete, it is better to have a smooth hole when cutting stone or concrete.

Concrete Drill Bit
Figure: Concrete Drill Bit

Conclusion

Stone cutting is a popular practice among professional, skilled users and unskilled operators. Cutting stone can be a little complex and difficult if you don’t have the right drill bit.

Manufacturers have provided different types of stone-cutting drill bits to cater to the demands of different users and applications. This article outlays four major types of stone-cutting drill bits.

In conclusion, therefore, as you continue to look out for helpful tips to help cut stone better, look no further, NCCuttingtools has got you covered.

Slitting Saw–6 Tips for Selecting the Correct Slitting Saw

Slitting Saw

Slitting saw have been in use for a long time and are popular among users looking to make narrow or deep cuts in metal. However, a common problem is knowing which slitting saw will make the perfect fit for the respective applications.

Manufacturers have catalogues of different slitting saws with various peculiarities for different jobs. This article will look to help you with tips to find the best slitting saws for your application.

Slitting Saw
Figure 1: Slitting Saw

1.Saw Arbor

Slitting saws design requires that there is support for the blade to connect it with the slitting saws assembly. The saw arbour is the shaft that extends from the slitting saw assembly to the blade. It is this shaft that the slitting saw motor drives to rotate the saw blade safely.

It should be evident now that the shaft diameter is an essential factor you must consider when choosing a slitting saw arbour. The hole that the shaft connects to within the blade is the arbour hole. For smooth and effective cutting, both the arbour hole and the arbour must be a perfect fit.

The arbour hole is directly proportional to the slitting saws blade outside diameter. As the outer diameter increases, the same goes for the arbour hole. As a general standard by most manufacturers, blade diameters in the range of 8″-10″ have an arbour hole of 5/8″. Ultimately you must ensure to check the manufacturer’s catalogue to know which arbour hole suits which blade diameter.

Now, if your job description demands that you cut a material that you hold with a vice, you might need a different type of slitting saw assembly. In such peculiar cases, you will a customized saw assembly that has an arbour with a deep cap.

2.Number of Teeth

Having the correct number of tooth count is essential for an effective cut for any project. Depending on some special applications like those demanding a fine cut, you will need a slitting saws blade with a higher tooth count. When it comes to tooth count for slitting saws, there are two major types namely;

1.Standard Tooth Slitting Saw blades

2.Coarse Tooth Slitting Saw blades

Standard Tooth Slitting Saws Blades: are slender with a higher number of teeth than its counterpart, the coarse blade. You will need this tooth count when your job description demands a smoother finish. Since more teeth are available, the feed rate can be higher than that of the coarse tooth saw blades. The only downside to using the Standard tooth saw blade is the cost price, which is considerably higher than the coarse saw blade. It is understandable because of its tooth count.

Coarse Tooth Slitting Saw blades: They are scanty slitting saws with less tooth count than the standard tooth blade. Famous for their simple and basic cutting, they are mostly applicable for large scale cutting with no attention to finish. The coarse tooth slitting saw blades have more prominent flutes compared to the standard tooth rendition. These flutes enable the blade to remove more chip. The coarse tooth saws are usually cheaper than the standard tooth saw blades mainly because of the lesser tooth count.

In the end, the slitting saw blade with more tooth count would cut cleaner than that with a lesser tooth count.

Slitting Saw Blade Teeth
Figure: Slitting Saw Blade Teeth

3.Type of Blade Material

Slitting saw blades often come in different material composition types, and there is a good reason for these varieties. Frequently, users have to cut various metals with different properties, strengths, and compositions. Due to this, users consider many factors before choosing the best slitting saw blade for their application. They consider things like cost, blade life, blade strength, etc. Hitherto, manufacturers have succeeded in having just two variations for the slitting saw blade material, namely;

1.Carbide-Tipped Saw Blade

Making blade tips with tungsten carbide is not a new practice for manufacturers. They are popular in use for most cutting tools. Tungsten carbide comprises of metal joined with carbon with a Mohs Scale rating of about 8 and 9. With a carbide-tipped saw blade, manufacturers often tend to make the body structure compose of steel. They mostly braze carbide tips on to the steel body to make the carbide-tipped slitting saw blade. A decent carbide tip can last up to ten times longer than the HSS slitting saw blade

Most slitting saw blades aren’t made entirely of carbide purely because it is a more economical perspective. For this reason, manufacturers stick with using steel as the body because of its superior strength and durability.

Carbide-tipped Sawblade

Figure: Carbide-tipped Sawblade

2.HSS cutting blades

High-Speed Steel (HSS) means treated steel. During the treatment process, the steel improves its strength, toughness, and durability. Quality HSS slitting saw blade can cut metal cylinders, auxiliary and strong metallic sections.

The HSS slitting saws blade consists of tungsten and molybdenum. After heat treatment of the steel, the tungsten and molybdenum help to improve hardness and sufficient durability. A specific level of tungsten in the blade is necessary for the right amount to create wear-resistant carbides. The tungsten also helps improve the mechanical endurance of the HSS slitting saws blade.

HSS saw blade
Figure: HSS saw blade

4.Slitting Saw Blade Thickness

Slitting saws blade thickness is critical as it determines the type of material you can cut. The manufacturing standard of most blade plate thickness is within the range of 1/8 -1/4 inch. Thinner blades, however, have their advantages with lesser waste bye-products. They are prone to wobbling and sometimes overheating. On the other hand, the thicker blade has a firmer grip on the material, providing you with more stability when cutting.

5.Slitting Saw Blade Size (Diameter)

The blade diameter is simply the length of the line between the tips of two of the blade’s opposite teeth, which follows through the blade’s centre. The blade diameter is also the size of the blade. All other segments of the blade are in alignment for the blade’s width. Ordinarily, you can only use specific blade diameters for particular applications. Attempting to use a bigger blade diameter for a smaller application will tie up the saw.

Until recently, the most well-known blade diameters from different manufacturers are in the range of 6-1/2″, 7-1/4″, 10″, and 12″. It is also important to note that you can only use slitting saw blades with a smaller diameter for saw operations. In contrast, bigger diameter blades are famous for their fixed saw application. Blades with smaller diameters are useful for faster cuts, simpler, and thinner metals. Manufacturers have also stated that the cutting ratio of the blade diameter is 0.3.

6.Kerf Width

The width of the slitting saws blade kerf is the widest of the blade tooth. The kerf or blade thickness is an essential part of the slitting saws blade as it is the segment that cuts in the material. It is vital to have wider kerfs for more effective cutting for cutting metals with slitting saw blades. A blade with thinner kerf might have complications like wobbling and sometimes complete breakage. However, the blade kerf width does not stand alone as it is directly related to the blade thickness.

Blade Kerf
Figure: Blade Kerf

Conclusion

A slitting saw is a cutting tool that is popular among professional, skilled users and unskilled users. The slitting saw is a perfect fit for the different materials you can imagine to cut.

Manufactures have provided different varieties to cater to the demands of different material properties. This article outlays the various tips you will find very useful when choosing to buy a slitting saw.

In conclusion, therefore, as you continue to look out for helpful tips to help maximize the use of your slitting saws, look no further, NCCuttingtools has got you covered. Click for a video with up-to-date information about how to use your slitting saw.

Multi-tool Blades–7 Tips for Selecting Multi-tool Blades

Multi-tool Blades

Multi-tool blades serve a wide range of purposes, such as polishing, scraping, cutting, sanding, and the likes. Ranging from cutting to routing, and sanding, a multifunctional tool is quite an essential component in any tool kit. With such a tool, you can easily switch from one productive activity to another, doing it quickly and efficiently.

Multi-tool blades come in different types, sizes, and qualities. More so, it is quite a necessity to know the prerequisites for choosing a good multi-tool blade.

So, this article encompasses the various uses of multi-tool blades as well as the crucial things to watch out for in picking one.

What are multi-tool blades?

As an umbrella term, multi-tool blades house the various types of blades which we use for multifunctional purposes. Blades such as carbide multi-tool blades, multi-tool tile blade, multi-tool metal cutting blades, multi-tool diamond blades, and oscillating multi-tool blades are the type of multi-tool blades we have.

They are tools that we use for various activities, such as stated above, and they differ in their multiplicity of function. We use multi-tool blades for a wide range of constructive purposes.

A multi-tool power blade
Figure 1. A multi-tool power blade

Selecting a Multi-tool Blade

Before selecting a multi-tool blade, there are certain factors that we must crucially consider if we are to make an ideal choice. Your selection must be based on these factors. You shouldn’t procure any kind of multi-tool blades until you have assessed them with these factors.

Below are some of the tips that you must consider before picking one.

1.Check for whether it is compatible with your oscillating tool.

One of the most prominent features of oscillating tools is their versatility. They are versatile in the sense that you can quickly select a wide range of accessories and blades to handle jobs such as polishing, sanding, cutting, to mention but a few.

Oscillating tools originate from different makers and, as such, come in different types, shapes, and sizes. Thus, it would be frustrating to realize that you got a blade that is too big or too small for your oscillating tool. So the moment you find the right blade for the task, make sure you check if it is compatible with your oscillating tool.

Multifunction power tool

Figure 2. Multifunction power tool

2.Consider the design of the blade to determine its ease of use.

It is another critical factor to consider when selecting your multi-tool blade. It is crucial to consider the design of your tool blade because this determines how comfortable you will be working with it.

However, the design of a blade will determine how efficient it would be at cutting into various materials. You wouldn’t want to be buying a 63mm blade to fit in a tight gap that is only suited for a 30mm or a smaller blade.

More so, when checking for the design of a blade, it is advisable to go for blades that have a “cut in” so that you have more mobility and better control when plunging into a material.

3.Check for the multi-tool blade manufacturer.

The manufacturer of a multi-tool blade is a very crucial factor to consider. You should ensure that the manufacturer of the blade you are buying has an efficient and reliable track history.

In essence, you should buy from a well-known manufacturer that people have vouched for over the years. Buying from just any manufacturer is risky as you may be buying a fake product from an unreliable source. Ensure you buy from a manufacturer that has a trusted brand.

However, if you require a manufacturer with reliable products, you can contact NC Cutting Tools. NC Cutting Tools is a highly prominent brand that deals with the sales of quality tools for construction. We have been in the business for numerous years, and we have gathered our trustworthiness as a result of the quality items we trade.

A Multifunction saw blade
Figure 3. A Multifunction saw blade

4.Crucially consider the speed of the multi-tool blade.

The speed of the multi-tool blade is quite essential as it ensures how quick you are in handling some projects. Projects, such as sanding, may require sanding pads, which will run at slower speeds, but to conclude a nail or meter-cutting job, you will need sturdy blades running faster.

The speed of the multi-tool blade is quite essential, and blades such as carbide multi-tool blades and multi-tool metal cutting blades must run at a considerable level of speed for you to conclude your project quickly and seamlessly.

An electric saw cutting stone

Figure4. An electric saw cutting stone

5.Reflect on the pricing

It would be best if you considered the price of the multi-tool blades. Of course, you do not have to empty your pocket simply because you need to purchase them. There are some blades which are affordable and which meet your requirements.

All you have to do is to ensure it is compatible with your device. You must ensure the blade you procure falls within your financial capabilities. Multi-tool blades come in different prices and quality. Still, you should go for affordable ones as long as they meet your expectations.

It is quite financially safe to procure items within your budgetary constraint.

6.What materials will you use?

What type of materials will you process? You must also consider what materials you shall use the multi-tool blades on to determine the right blade to go for. It shall help dictate your selection.

Various types of materials require different types of blades for good results. Different types of multi-tool blades serve different purposes. Therefore, you must make sure to choose a blade that is suitable for the material you are using.

To do a neat job, you must select the blades which fit that specific task. In doing so, you do the job perfectly.

7.The materials of composition

It is also necessary to consider the build-up material of the blade you intend to use. A tasking job will undoubtedly require a blade that possesses durable and robust materials. It will ensure that the blade carries out the task without breaking.

You must be keen on looking out for the build-up materials to determine how well it can withstand terrific projects. Moreover, it will also help you in discovering whether the blades are of inferior materials or not.

When you want to procure any multi-tool blade, try as much as possible to check out its build-up materials critically.

A masked woman using a circular blade to cut wood

Fig 5. A masked woman using a circular blade to cut wood

Frequently Asked Questions About Selecting Multi-tool Blades

1. How can I improve my technique for general woodcutting?

To improve your general woodcutting, you could try using your blade to make a score cut to have a definite bearing of your desired cut. The shallow cut will help you to keep track of your cut calculatedly.

With each new pass, you would now be able to keep extending the length of the cut with the blade.

2. Should I use a Coarse or Fine tooth blade for deep plunge cutting?

Even if you are dealing with hard or softwoods, coarse blades have the advantage over fine tooth blades. It is because, as you cut deep into the wood with a coarse blade, the sawdust build-up will occur without binding because of the availability of blade clearance.

So, using coarse blades is much better.

3. When do I use the circular style multi-tool blades?

You use the circular style multi-tool blades for panel cutting and stock materials, which are thinner. The circular style blade is perfect for long and thin cutting spans in materials such as plastics, wood, and thin metal sheets.

4. What is an oscillating multi-tool blade used for?

The oscillating multi-tool blade is one of the handy and multifunctional equipment you can have in your tool kit. We use it for a plethora of tasks such as sawing metals, drying walls, making large holes, undercutting doorways, removing grout, cutting off nails and screws, and so many others.

5. What makes an oscillating tool better than regular tools?

Oscillating tools are better than other regular tools because it is quite multifunctional. It serves a wide range of purposes, and it is present in many types of toolboxes.

When you use an oscillating tool in handling big projects, the level of dust (which will inevitably erupt while working) won’t be as much as when other regular tools are in use.

Besides, an oscillating tool enables you to do the job quickly and efficiently. It also ensures that a construction job is less hazardous.

Summary and Final thoughts

Multi-tool blades are tools for working on a wide range of constructive activities, and they have a place in every tool kit.
If you have a job that requires the use of multi-tool blades and you don’t know the right manufacturer to patronize, look no further.

NC Cutting Tools have the best multi-tool blade on the market.

We sell nothing short of quality, and our tools are quite affordable. So, contact us today to get your multi-tool blades at an affordable price.

Glass Ring Saw –You Know 5 Things Glass Ring Saw Do Well

Glass cutting ring saw at work.

Since time immemorial, man has devised ingenious means to go about construction works. The constant and conscious efforts made by man towards advancing construction has today yielded immense result. One of these many results includes the advent of saws for cutting any type of material in this case, the glass ring saw. The glass ring saw is a small diameter wire ring designed to spin at high speed to cut glass of form. Although the ring saw can be useful for other purposes, the focus of this article is on glass cutting using a ring saw.

Fig.1: Glass cutting ring saw at work.
Glass cutting ring saw at work.

1.Making Complex cuts and pattern

Upon the invention of the glass ring saw, cutting off certain shapes and patterns seemed impossible. It is safe to say that the glass ring saw turned the game around when it comes to glass art. Artists that deal in glass for their craft find this very useful and handy to have around. The blade of this saw is made abrasive instead of toothed. Furthermore, the abrasiveness of the blade is due to the coat of diamond around it. The ability of the ring saw to cut intricate and straightforward pattern is inherent in the blade, cutting in all directions. Forward, backward, left, or rightwards cuttings are all achievable with the glass ring saw.

Regardless of the industry you belong to, you would find this tool extremely important to your day to day work, the round shape of the blade makes it effortless to manoeuvre when cutting out any pattern of shape on the glass. With the glass ring saw, you need not bother about chips or breakings of your workpiece during cutting. All these have been well taken care of in the design of this great tool.

Above all, this saw helps to achieve highly precise and accurate cuts of any shape. Once you have this saw, making tight curves and cuts becomes easy-peasy.

Fig.2: Picture showing irregular shapes of stained glass.
Picture showing irregular shapes of stained glass.

2.Cutting of fused glass

Before going further, let’s briefly analyze how pertinent a glass ring saw is to cutting fused glass. We must examine the technology behind fused glass itself. In case you are wondering what a fused glass is, it is a type of glass made form melting different pieces of glasses together at high temperatures up to 820 degrees Celsius. Once these glasses have been melted together and formed rightly, how to cut and avoid breakage comes into play.

Already, when setting-out to produce this fused glass, manufacturers should have considered the compatibility of the constituent glasses. Often, manufacturers already perform their tests to determine the compatibility of the glasses they intend fusing before commencing. The importance of this test helps to determine the strength and integrity of the final product.
Having picked your preferred fused glass for your project, then you need to cut it to shape. If you are a glass art enthusiast, then the glass ring saw is a must-have for you. Rightly investing in an equipment such a glass ring saw is a great plus for you as a glass artist.

Generally, always be careful when using glass. Most especially a fused glass, to avoid breakage. You, therefore, need to have the best glass ring saw at your disposal if you desire to excel in this field. Owning a glass ring saw will save you a lot of stress, increase your efficiency, and give your accurate cuts.

Fig 3: Marking-out on glass in preparation for cutting.
Marking-out on glass in preparation for cutting

3.Cutting very thick glass

What comes to mind when you hear very thick glass? Thick glasses are known for their application in both residential and industrial/commercial purposes. In some cases, you can call them heavy-duty glasses. With the glass ring saw blade, cutting this type of glass has never been easier. Below are the range of glass thickness mass-produced with their specific purpose-

3/32″ (2mm)- known for picture framing.

1/8″ (3mm)- For end tables, windows, picture frames, and insulated units.

3/16″ (5mm)- For shelves, small tabletops and insulated units, etc.

1/4″ (6mm)- For protective covering on tables, insulated units, paned windows, shelves, and shower doors.

5/16″ (8mm)- usage is similar to 1/4 inch, but not common in the US market.

3/8″ (10mm)- For office portioning, walls, shower doors, handrails, used in shower doors, tabletops, glass walls, glass partitions, bars, door lights, etc.

Of all the thicknesses listed above, the very thick ones range from 3/8” up to 1”. Over time, thick-tempered glasses have found their way into the heart of architects and designers. Often, the 3/8″, 1/2″ and 1″ are commonly used for retail stores, modular offices, tabletops, reception desk, etc. The reason for adopting thick glasses for this purpose is not far-fetched as cracking must not occur at all.

In this case, cutting thick glasses with glass ring saw is essential if you are into this business or industry. The diamond coat around the blade enables it to penetrate deeply into the depths of thick glasses conveniently. Consider purchasing this glass ring saw to help you pull off smooth cut on these extremely thick glasses.

Fig. 4: Set of glasses with varying thickness.
Set of glasses with varying thickness

4.Cutting drapery glass

Unlike other glasses considered in the previous section, this type of glass is different and unique. Whenever you come across a cloth-like, well-folded, and wavy glass usually associated with uneven thickness, then it’s a Drapery glass. Drapery glass has its front and rear side not equally thick, meaning it’s not flat. It could significantly affect the cutting and overall ease of handling this glass.

A glass ring saw befits this purpose due to its ability to cut in any direction in a bid to cut properly. Often, this glass is fused and stained in nature; i.e., it is a product of different melted glasses with different colours, which makes it stained. For this reason, before advancing to cut this glass, you must score the pattern with the saw. Scoring involves making an initial outline of the pattern you want to cut. Scoring the glass helps to avoid any possible case of breakage or chip falling off the edges.

As you set out to cut, you need to observe the following features of the drapery glass. Firstly, on the front of some drapery glass, the folds appear to be reversed while the rear is hollow. In other cases, the rear side is flat, and the folds are on the front with visible thickness in places.

Secondly, after carefully classifying the nature of the drapery glass, you must cut from the surface with the least irregularity. Watch out for the reverse side of the drapery glass for marking out your pattern over the drapes’ front side. More irregularities imply thicker glass, which makes it more challenging to cut than a flat side or lesser irregularities.

Thirdly, position your glass in such a way that you can easily cut the proposed pattern. Lastly, ensure you score the outlined pattern before fully cutting with the glass ring saw.

Note that with the glass cutting ring saw, you need not polish your workpiece as the cut is always perfectly executed.

5.Cutting small pieces

Here, the glass ring saw has a lot of advantages due to its design. The tabletop attached to the saw makes it easy to cut extremely small glasses accurately. Again, tiny bits of glasses have proven to be a valuable asset to a glass artist. Mosaic artists find these small bits of glasses useful as well. You can either cut out small pieces from off-cuts or large sheets of glass. You can decide to decorate with small glasses. You can also opt to join different tiny bits into a piece of artwork. In essence, a glass ring saw can cut your glass into sizes; even a handheld cutter cannot achieve. Over the years, many glass artists and enthusiasts have attested to the relevance of the glass ring saw.

Fig.5: Picture showing broken and small pieces of glass.
Picture showing broken and small pieces of glass

Conclusion

In this read, we have not only discussed the cuts possible by the glass ring saw but considered other factors. Regardless of the glass cutting project, be assured of the appropriateness of the glass cutting ring saw any day anytime. Building construction professionals do not take the glass ring saw for granted in their day to day activities. The importance of stained-glass ring saw cannot be over-emphasized, whether as an artist or a small business owner involving glass. You just have to ensure that you allow the blade to do the work and not force it. Do not hesitate to contact NCCuttintools. We remain resolute as a foremost solution provider of cutting tools and accessories. Our requisite knowledge and experience of over 30 years remain pivotal to our relevance to date in this industry. Do well to check out this video should you require further guidance in using this excellent tool.

GET A QUICK QUOTE

Fill in your details and we’ll get back to you in 24 Hours.