Caption: Segment circular saw blades with carbide tips
Carbide saw blade usually made from a mixture of carbide with elements like tungsten, iron, silicon, etc. These tools are famous for their widespread use.
Are you still thinking whether a carbide saw blade is the right choice for your next project? If that is the case, check out our list of carbide benefits and learn more about these tools!
Table of Contents
- Chapter 1.Carbide Saw Blade–It Is Extremely Tough
- Chapter 2.A Carbide Blade Saw Remains Sharp for Longer Than Steel
- Chapter 3.Carbide Blade Saw–It Has a Long Lifespan
- Chapter 4.A Carbide Saw Blade Is Resistant to Thermal Damage
- Chapter 5.An Excellent Investment in the Long Run
- Chapter 6.Cleaner Finishes and Cuts
- Chapter 7.Easy to Replace
Chapter 1.Carbide Saw Blade–It Is Extremely Tough
Caption: Saw blade on wood carbide inserts
Did you know what the main advantage of choosing a carbide saw blade over steel is? According to experts, it is the toughness of this material and its resistance to damage.
Let’s say that you need to cut a hardwood piece. The chances are it contains tiny minerals or silica particles. Unless it is considerably thinner and smaller than your steel blade, the chances are the hardwood might damage it. The same applies to small rocks, sand, and debris found in wood applications.
Solid carbide cutting tools are a far durable choice for strong wood and other materials. These saw blades are tough and capable of pushing through debris effortlessly. That way, you minimize or eliminate the damage that your blade might suffer.
Here is another situation where the toughness of carbide is critical. You might need to cut lumber or even metal that you want to use for another purpose. Cutters might need to be careful about screws, nails, and bullets found inside those applications.
You might not notice all nails and hit them with the blade while cutting. A steel blade is likely to break, but if you use carbide, it will be durable enough to cut through. The chances are you will go through a nail without noticing it.
Chapter 2.A Carbide Blade Saw Remains Sharp for Longer Than Steel
Caption: Carbide table saw blade
Since a carbide circular saw blade is tougher than its steel counterpart, it can maintain its sharpness for longer. Steel is not that tough and durable, which is why the blade tends to get dull quickly. That means you will need to sharpen it frequently, which requires additional time and effort.
On the other hand, you only need to use a carbide saw blade sharpener on rare occasions. The tool’s capability to remain sharp is impressive. That contributes to the overall convenience of using the tool.
The experts advise against using a dull blade for multiple reasons. It will almost certainly lead to chipping. You might even encounter overheating issues that burn the cutting material. The risk also lies in causing a blow-out of the grain and shattering it.
If you use a sharp blade, you will increase the quickness of cutting, as well as smoothness of the cut. Those who are using woodworking machines will also decrease the load that they endure. That is why you should check the sharpness of the blade frequently.
Chapter 3.Carbide Blade Saw–It Has a Long Lifespan
Caption: Carbide circular saws
Did you know that carbide saw blades can last for up to two decades? That is an ambitious forecast, and it depends on many factors. First, you will need to maintain the tool by cleaning it regularly and storing it safely. Additionally, you will need to replace the tips whenever necessary.
However, even if your blade lasts for several years, you will get excellent value for money. Here is a vital tip on how you can boost the longevity of your carbide saw blade. Since the tips of your blade will be the one most prone to wear and tear, fortunately, you can have a professional to replace only the tips. Any local shop should be capable of welding replacement tips on your unit reasonably quickly.
Chapter 4.A Carbide Saw Blade Is Resistant to Thermal Damage
Caption: Carbide-tipped rotary saw blade
Overheating is a serious issue for amateur and professional cutters. You need to monitor the heat level during the process.
Too much heat can cause various problems for steel blades. For starters, high temperatures might change their shape. Those deformations could render steel tools unusable.
It is an error that frequently happens to beginners. They are often unaware of the high heat before they run into a problem.
Thermal deformations are a common issue, and one of the ways to fight it is by choosing carbide saw blades.
These blades are robust and resistant to general wear and tear, but also extreme heat. They can maintain optimal
performance even when the temperature is at very high levels. If you are in a rush, you could benefit from not thinking about the heat too much. Carbide saw blades enable you to focus on the cutting results and ignore overheating issues (at least to some extent).
The resistance of these tools to heat will improve efficiency when cutting. You will be able to go through more applications than with steel units.
Chapter 5.An Excellent Investment in the Long Run
Caption: Tungsten carbide-tipped saw blades
Saw blade buyers often have the wrong mindset. They are looking for the cheapest solutions available on the market without worrying about the lifespan of the blade. However, if the user ruins the tool quickly, that means they will need a new one.
That is an additional expense, and if you count all investments, you get a high price tag.
For the same money, you can get a durable and long-lasting carbide saw blade in custom dimensions. Carbide is resistant to heat and overall damage, which makes it cost-effective in the long run.
The odds are a single carbide saw blade would last longer than multiple steel units. Not only that saves you money, but you also don’t need to go through the hassle of buying a new blade frequently. It is a win-win situation for both your budget and the convenience of using the tool.
Chapter 6.Cleaner Finishes and Cuts
Caption: Carbide-tipped blade on a radial arm saw
What is your primary consideration when cutting any material? First, you want to make an accurate cut. But if we are honest, that is where the cutter’s skills are most important. On the other hand, the tool significantly affects how smooth and clean your cut will be.
Due to the durability and toughness of the blade, the edges can remain sharp for a considerable time. As you might know, only a sharp edge is capable of making smooth and clean cuts. The fact that carbide tips will stay sharp for a significant time will enable you to cut various applications smoothly.
That is critical for various reasons. Not only you get the results that you want, but you get them the first time. It saves you a lot of time and effort. Imagine the minutes and nerves you would have to spend on adjusting the imperfections to get the desired results.
The significant think about clean cuts is that carbide saw blades can make them on both wooden and metal applications. These tools won’t reduce grain damage compared to steel and ensure that an improved joint fit and tighter glue bonds.
Thanks to these clean cuts, operating the tools will also be easier. The chances of kickbacks will be minimal, which minimizes the risk of injury. That makes carbide saw blades a safe tool selection, especially for those with a lack of experience.
Chapter 7.Easy to Replace
Caption: A circular saw with a carbide brazing
We already went through this in the article, but a reminder doesn’t heart. Carbide-tipped tools are particularly durable because they are easy to replace. If your tips got dull, you could use a grinding technique to get rid of old carbide and add new carbide layers.
The critical advantage of tipped tools compared to solid carbide is that you don’t have to buy a new tool in case of breaking it. Once breakage happens, you might be able to remove the old tips. It is much more convenient than buying a new blade.
However, it is worth noting that not even carbide saw blades can last forever. The good news is that you don’t have to throw away the blade that you can’t use it anymore. Don’t be afraid to get creative and use it differently. For example, you can design a small ax from a used saw blade.
Carbide saw blades come with multiple benefits that make the cutting process easier and more accurate. Additionally, these tools can save time, effort, money, and other resources. The only thing to ensure is to pick the right company for purchasing your blade.
You have many carbide cutting tools manufacturers on the market, but you want an experienced provider. That is why you can’t go wrong with NCCuttingTools.
Here is an overview of the reasons why you should choose this manufacturer:
• More than 20 years of experience in the industry – that enables them to tackle both simple and complex projects.
• Skilled engineers with extensive knowledge – the professionals working at the company have all the required skills to design high-quality carbide saw blades.
• State-of-the-art equipment – the company has all the tools required to meet the needs of even the most complicated orders
• Meeting customer’s requirements – the manufacturer listens to your specific requests and makes sure to follow the instructions to the smallest detail.
• Fast delivery – the company is capable of delivering your tools quickly, even for large orders!
• Competitive prices – the cost of tools is among the most affordable you will find on the market.
If this sounds like a good deal, please feel free to contact NCCuttingTools to discuss your order details!