Continuous Saw Blade – How to Use it For the Best Experience

Professional contractors and DIYers alike prefer the continuous saw blade because it will provide the smoothest cutting. Whether cutting via wet or dry cutting, these blades are essential for the proper installation of countertops, tile, concrete fixtures, and any other type of stonework found in a home or a commercial establishment. So what makes the Continuous Saw Blade a favorite for contractors and DIYers cutting stone. Let us continue.

Blade cutting through stone

Section 1: Benefits of a Continuous Saw Blade

Continuous saw blade going through stone again

There are plenty of reasons that contractors and DIYers trust continuous saw blades for their stonecutting needs. The biggest reason is that these blades deliver a proper cut on tile, stone, and even concrete. Having these saw blades available for a continuous saw blade means there is less chance of chipping and other deformities that are unable to repair with a bead of caulk. There are several advantages to this type of blade. The biggest advantage is the smoothness of the cuts. For people working with stone, concrete, ceramics, and tile, having a precise, clean cut means the installed product will look proper instead of having deformities. This is because the blade is always in contact with the surface that it is cutting. That key advantage ensures there is no chipping or cracking occurring. The cut may take longer, but it is a better and cleaner cut.

When it comes to making a smooth cut, there are so many different ways that a continuous saw blade helps DIYers and contractors. The first is examining the straight cut. These cuts usually go through long pieces of material. This results in overheating many times, and that, in turn, means there can be problems with the saw apparatus and the blade if you are dry cutting. That said, there are other ways to use these cuts as well. Mitre cutting is a great way to get some unique angles, especially if the area cut will fit into a different type of space than just a straight cut. With tile, there can be many types of cuts, including diagonal cuts, as well. Having a continuous saw blade is an easy way to make sure that the cuts are precise and smooth.


Section 2: Use of the Continuous Saw Blade

Wet marble cutting

There are plenty of reasons that DIYers and Contractors like to use stone finishes. The first is that among homeowners today, these finishes are especially stylish. The granite or marble countertop is the hot commodity for many homes – there are even people who like to get scrap stone and shape it for their houses as well. The price of the stone has increased, which is why having the right equipment to make the precise cuts is important. Other materials meriting the same consideration are concrete, ceramics, and tile. These different finishes are ubiquitous in today’s homes, and with the creativity that people are putting into designing their homes. DIYers and contractors prefer the continuous saw blade because it offers much in the way of the solutions to make sure that all of the stone is correctly use.

There are two ways in which continuous saw blades operate – wet and dry cutting. The process for each is simple to understand, along with the advantages or disadvantages.

Dry cutting is the material placed into a vise; the continuous saw blade goes to work, cutting the stone. This seems relatively simple, and for the most part, it is. However, there are some reasons why dry cutting is not optimal. The first is the amount of dust kicked up can be harmful to breathe in, and the dry cutting also causes the continuous saw blade to get quite hot. This heat can warp the blade. Also, dust can get into the engine of the continuous saw blade, causing it to malfunction. Dry cutting is something used for smaller cuts that do not require a lot of operation of the continuous saw blade. This is a big advantage over the wet cutting.

The difference with wet cutting comes down to the fact that a constant stream of water is going over the surface of the stone and interacting with the continuous saw blade. This interaction keeps the blade cool and washes the dust away. This seems like an ideal solution, and in many cases, it is. However, there are some reasons to avoid wet cutting as well. The biggest reason is you must have a water source and an area that will not contaminate with the runoff featuring stone dust. Also, if you are cutting smaller pieces, wet cutting is a good solution. But it requires a bit more time to get the water going than it would be just to hit a quick dry cut. So, whenever deciding whether to cut wet or dry, consider the scope of the project and make the decision.

The good news about continuous saw blades is they have no problem going through dense stone such as granite, ceramics, tile, marble, or concrete. These blades are extremely useful thanks to their versatility. It could take longer to cut through a surface, but that is because the continuous rim has no areas in which the blades separate and form teeth. The saw blade acts as a burr. The good news is these blades eliminate the need to smooth out a rough cut. Though it may take longer, anyone who uses a continuous saw blade is happy with the results. The results are a smooth, beautiful cut that will fit a space with little need for further modification.


Section 3:What are the Characteristics of Continuous Saw Blades

Saw blade cutting stone

There are several features on the continuous saw blade that impact the performance of these blades positively. This continuous saw blade is a bit different from the other saw blades that can cut through stone, but that does not make it any less effective. Here are some of the features:

  • Continuous Rim: This unbroken area of the saw blade is the reason why all of the cuts are smooth. Teeth can chip and crack the stone. However, the continuous rim has no such issues
  • Solid Blade Structure: This blade may heat up a bit quicker because there’s no way for heat to escape the blade. That said, the blade is more solid, and that means it is less prone to cracking

Section 4: Social Comments on Continuous Saw Blades

Cutting through granite

“The neat thing about these is that about three passes through a standard brick and they cut as good as new again. I’ve not had those results with other blades AT ALL! I’ve always just put a new blade on instead of wasting time trying to get one to cut properly again.” – Will S.


Section 5:What can I Choose Besides the Continuous Saw Blade

Continuous saw blade through granite

o Diamond Tipped Saw Blades: These blades make short work of cutting masonry and other types of hard stone. Use them to get through the stone so that you can have your countertops and tile done in no time. They are best when used with wet cutting. Unlike continuous saw blades, these blades have teeth

o Segmented Blade: These blades are among the most durable on the market due to their cutting surface and, in some cases, diamond finishes. Great for dry cutting as well and offer lots of different ways to make cuts. Segments can chip and crack, unlike continuous saw blades.

o Abrasive Blades: These blades come from materials that are abrasive and can cut metals and steels, unlike continuous saw blades. These blades are a bit more versatile and have great durability.


  • Always Wear a Mask: Dust kicks up a lot in dry cutting. Wear a mask to prevent inhaling of dangerous particles
  • Know Your Cuts: Dry cut for smaller cuts, wet cut for bigger cuts
  • Check Blade: If you notice warping or nicks on the blade, time to get a new one, as these issues result in chipping

Section 6: Conclusion

Cutting through stone again

There are many reasons that people choose continuous saw blades. The biggest reason is that these blades help make smooth cuts to some of the hardest stones to cut. The blades are very easy to use, and because of the continuous rim, they will not chip and crack the stone. There are several uses for continuous saw blades. But if you are making cuts that are to fit a certain space, or the cuts must look smooth. Then using these blades ensures that anything anyone else can see will look proper and professional. There are many great continuous saw blades available for people looking to get the right type of stonework done. Click this link and pick up some continuous saw blades so you can have great finishes in your home.

Share on facebook
Share on twitter
Share on linkedin

Contact us for a free sample

Cookies help us deliver our services. By using our services, you agree to our use of cookies.