Table Saw vs Circular Saw: 7 Things You Need to Know

Often, Saw blade users run into major problems on jobs due to the wrong choice of tools. It is not just enough to have worked with a saw in the past or operated a saw. You must give priority to present and future tasks to choose the right saw.

Whether you are at crossroads on which power saw to purchase for yourself or supply your customers, you just desire to know more about the table and circular saw. Then look no further, this article is just what you need to get it right.

Figure 1: A table saw showing its guardrail and saw blade.

A table saw showing its guardrail and saw blade

1.Basics about both tools

Table saw

Typically, for a table saw, the workpiece is fed to the blade, i.e., the saw blade is stationary while the workpiece is pushed through the blade by you/operator. They are the best tool for accurate and clean angular cuts, especially for woodworks and tile cutting. However, its non-portability and size make it only suitable for only large workshops.

It is safe to say a table saw is more like a circular saw fastened to a table protruding through a slit somewhere around the middle of the table. Unlike a circular saw, it features a large table to enable you to lay/rest your workpiece conveniently while cutting. Other special and unique feature includes a crank to adjust the blade to vary cutting depth or angle, the addition of extra components to better its functionality, a guardrail to guide the feed of the workpiece to the blade for accuracy, etc.

Circular saw

Whenever you have a stationary or fixed workpiece to deal with, then a circular saw should come to mind. Circular saws are portable and handheld power saws that are powered by a battery, electric motor, or electric cord. They are regarded as the most versatile power saws to have in a workshop. Unfortunately, it lacks accuracy and precision derived from a table saw.
Depending on the output power of the saw, the mode of driving the blade differs. High horsepower circular saws have electric motors that connect to the arbour carrying the blade through a belt. Small-sized circular saws, on the other hand, utilize a rechargeable battery. Circular saws for concrete or asphalt cutting are electric motor driven while those used for woodworks or plastic cutting are directly plugged-in or has rechargeable batteries.

In the hands of professionals, its portability guarantees easy maneuvering when cross-cuts and rip cuts are made.

Figure 2: Picture showing the portability of circular saws.

Picture showing the portability of circular saws

2.Specific Applications

No doubt, table saws have high efficiency as they make cross-cutting and ripping of boards effortlessly simple. In practice, table saws are primarily for wood cutting. They cut easily through dado, tenon, and lap joint.

Circular saw it applied to a variety of cutting jobs. You can use them to make excellent cuts of wood, plastic, metals, tile, and concrete. However, as a beginner or DIYer, you might find it hard to handle at first, especially for cutting materials other than wood.

Figure 3: A woodworker making rip-cut using a table saw.

A woodworker making rip-cut using a table saw

3.Accuracy of cut

One prominent characteristic that continues to distinguish a table saw from a circular saw is the accuracy of cut they both produce. Table saw helps you achieve highly precise and accurate cut with relative ease. You can make fine, fast, and even angled cuts with the help of an adjustable guardrail beside the blade. Another reason for the perfect cuts is the fact that the saw is stationary, thereby giving you enough opportunity to position and maneuver the workpiece properly. The high accuracy of this saw also makes it a favourite among woodworkers.

For a circular saw, the level of accuracy is much lower than that of the table saw. For you to produce the same perfect cuts with a circular, saw a lot of practice is required to avoid mistakes. Again, the reason for the lack of high accuracy and precision is not far-fetched- it is due to the mobility of the saw. Excessive vibrations could set in, and that is a great disadvantage when cutting. To, therefore, get better cutting accuracy, then you need to install a proper guide.

Figure 4: A precise and accurate cut on a table saw.

A precise and accurate cut on a table saw

4.Which service life is longer?

Even though the table saw is larger, the maintenance is still somewhat easy-peasy. Most of its frequently damaged parts are easy to access when broken for removal and replacement. Its largeness leaves you with several internal parts that need to be cared for while its stationary position means you need not worry about it falling or accidentally damages when taken out and in of your store. We need not also mention that adequate maintenance is pivotal to the useful service life of any tool or equipment. It implies that a table saw will last far longer than a circular saw.

Despite, circular saws requiring little or no maintenance, they are not built to last forever. Owing to easy mobility, you are likely to lose parts and tiny components unconsciously in the process of moving from site to site or even lending it out to a friend. Lost parts could negatively affect performance as a result of this leading quick break down.

In general, the table saw is durable and has an excellent tool life, while circular saw has just about an average tool life.

5.Price comparison

If your budget is considerably tight and low, then you should not go to a table saw because they are quite expensive. Its bulkiness and complexity also contribute to the high price. If you are also not thinking of keeping the saw blade for a long time, then you shouldn’t opt for it. It would not worth it to spend so much an amount on saw to want to dispose of it after a few months, a year or two. It is encouraged if you have a very long-term continuous project.

Circular saws are relatively cheaper and would be a good buy for you if you do not have a lot of cash to spare. A circular saw would purchase a circular for just a fraction of the cost of a table saw. The low price of this saw is majorly due to the simplicity in design, as it contains a fewer number of parts than a table saw.

6.Which is more convenient to use?

Generally, convenience is not a one-way thing. No saw can qualify to be the most convenient. It all depends entirely on your intention and long-term goal for your saw. If you have a large workshop, the table saw would suit you best. It is because you have enough room to afford you take on large board cutting without fear of mistakes or inaccurate cuts.

In contrast, a circular saw would fit you if you are a site contractor with a truck to move from one place to the other, or you have small materials to cut, which are either indoor or outdoor.

7.Safety/ how to handle

Table saw

The issue of safety is no joke in any working environment. By the exposure of the blade, it poses a constant danger to operators or even careless passers-by. Inexperienced/amateur users are the ones highly at risk. Instead of this, brake systems have been incorporated into the design of the table saw.

In handling this saw, you should bother less about how to operate it and worry more about the proper placing of your workpiece when feeding into the blade. Proper placing and monitoring are important to avoid the blade from roughly cutting the workpiece.

During use, the table saw has an effective sawdust disposal system in place. Pile of sawdust or other material chips is collected into the dust collector for easy disposal afterwards.

Circular saw

When you opt for this saw, then you have fewer chances of getting yourself or other people around you injured. There is a permanent cover plate that covers the blade up to half its circumference leaving the other half to feed into the workpiece. It’s reasonably easy to operate and handle when in operation.

With so much dust thrown around, You would need to properly clean-up after use
.
All necessary safety precautions guiding the use of both saws must be strictly adhered to for accidents not to occur.

Figure 6:Cutting the circular saw blade shows its cover.

Cutting the circular saw blade shows its cover

Conclusion

In summary, from all the enumerated points above, you can deduce the different scenarios where you need the table and circular saw specifically. You should also be able to make your preferred choice as well after having digested the content of this article here. For more information, kindly contact us at NCCuttingtools. We will be ready to offer relevant assistance and consultation service to help you achieve your aim.

Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn

Contact us for a free sample

Cookies help us deliver our services. By using our services, you agree to our use of cookies.