What Hand Saw Do You Need?<\/strong><\/h2>\n\n\nThe different saws available in the market sometimes challenge choosing the right one. How many or what type of saw do you need to complete your tasks? <\/p>\n\n\n\n
This depends on your individual needs or the purpose of the saw. Here\u2019s a brief look at six common saw types. <\/p>\n\n\n
Hand Saws for Woodworking: Full-Length Rip Saw<\/h3>\n\n\n
A typical full-length saw is 24 inches. Always match the length of the saw with your height for efficiency and comfort. A 5 PPI saw can break the wood aggressively and leave jagged edges. File four degrees of rake. <\/p>\n\n\n
Hand Saws for Woodworking: Full-Length Crosscut Saw<\/h3>\n\n\n
Most people go for a 24-inch saw length, but it\u2019s important to size it to your height. <\/p>\n\n\n\n
A 10 PPI full-length crosscut saw is aggressive enough to cut through stock while leaving fine dimensions. File the saw with 15 degrees of rake and 25 degrees of fleam.<\/p>\n\n\n
Tenon Saw, 16\u2033<\/h3>\n\n\n
The Tenon Saw, 16\u2033, is the ideal rip-filed joinery saw. You may not use it frequently, but it helps when cutting tenons. It has 11 PPI and needs four degrees of filing. <\/p>\n\n\n
Sash Saw, 14\u2033<\/h3>\n\n\n
Sash saw shares a similar style with Tenon Saw. File it at 15 degrees of rake and 25 degrees of fleam. This saw is ideal for precision crosscuts, cheek cuts, and tenon shoulders. <\/p>\n\n\n
Dovetail Saw<\/h3>\n\n\n
This saw is about nine inches long and is dedicated mainly to cutting dovetails. It contains 17 PPI and files with a rip at zero degrees of rake. <\/p>\n\n\n
Turning Saw<\/h3>\n\n\n
This saw is the top choice for curved works. Turning Saw is 12 inches long and contains 10 PPI. You\u2019ll love this saw, thanks to its lightweight nature makes it one of the best coping saws. <\/p>\n\n\n
How to Sharpen Hand Saws for Woodworking\uff1f<\/strong><\/h2>\n\n\nFollow these simple steps when sharpening your saw:<\/p>\n\n\n\n
\n- Clean off dust and debris from the saw surface<\/li>\n\n\n\n
- Clamp the saw using a saw vise <\/li>\n\n\n\n
- Straighten any crooked teeth to ensure the file moves evenly <\/li>\n\n\n\n
- Use a jointer for different-length teeth to flatten any taller teeth<\/li>\n\n\n\n
- Select a file that matches your saw\u2019s TPI <\/li>\n\n\n\n
- Attach a handle to the file to keep it steady as you work<\/li>\n\n\n\n
- Hold the file straight at a perpendicular angle to the blade and start filing using short and even strokes<\/li>\n\n\n\n
- <\/li>\n<\/ul>\n\n\n