{"id":2667,"date":"2022-12-01T04:23:16","date_gmt":"2022-12-01T04:23:16","guid":{"rendered":"https:\/\/www.nccuttingtools.com\/?p=2667"},"modified":"2023-01-16T09:27:03","modified_gmt":"2023-01-16T09:27:03","slug":"table-saw-blade-3","status":"publish","type":"post","link":"https:\/\/www.nccuttingtools.com\/table-saw-blade-3.html","title":{"rendered":"Table Saw Blade-9 Tips for Maintaining Your Table Saw Blade"},"content":{"rendered":"\n
Caption: Table saw with the blade exposed<\/p>\n\n\n\n
When making precise, straight cuts, few tools are as easy to use as a table saw. The table saw blade is a large piece of equipment with a blade protruding upwards. Using the guards and other parts of the saw, you will have no problem cutting lots of different types of wood. Whether it is doing projects like building homes or something bigger, you’ll have to use a table saw and maintain it to get the best results. Learn how to easily maintain your table saw blades, and you will enjoy the years of efficient use you’ll get.<\/p>\n\n\n
Caption: Table saw ready for work<\/p>\n\n\n\n
A massive problem many people have is sawdust. The issue is that sawdust gets everywhere, and when it does, it causes a lot of problems. If sawdust is getting into your motor, then your motor is almost certainly going to overheat. When this happens, the blade starts spinning improperly, leading to the degradation of the quality of the cut. It can be a very dangerous thing. What you should do is vacuum all after you have finished using the table saw for the day. It will ensure you always have a motor that works properly. Get the sawdust out of all the nooks and crannies for a table saw to work most effectively.<\/p>\n\n\n\n
Video: https:\/\/www.youtube.com\/watch?v=iAMnYsf5XqI<\/a><\/p>\n\n\n The way that a saw blade cuts through the wood is not that complex. The blade spins and cuts wood. However, the wood’s angle is different, meaning you must maintain this area. Gears and pivot points are vital for securing wood. Table saws<\/a> work with gears and pivot points snapping into place. If they snap in weakly, then you could be in danger. If the wood swings out, that could be extremely dangerous. Therefore, make sure everything clicks into place so you can cut accordingly.<\/p>\n\n\n A clean blade is a blade that works efficiently. The more feed pressure there is, the worse the blade is cutting. Besides having a rougher cut, the wood can jump, which poses a serious threat to injury through blunt force or cutting. Therefore, cleaning the blade is necessary. Pitch and gum remover is the best tools for cleaning. When you are doing this cleaning, unplug the machine. The last thing you want to do is trigger the machine to turn on, which would be extremely dangerous and possibly life-threatening.<\/p>\n\n\nSection 2: Table Saw Blade–Check Gears and Pivot Points<\/h2>\n\n\n
Section 3: Cutting Blade Cleaning Methods<\/h2>\n\n\n
Section 4: Table Saw Blade–Maintain Tabletop<\/h2>\n\n\n